Picture by Writer
# Introduction
GLM-4.6 is the most recent model of the Z.AI open-weight coding mannequin, providing vital enhancements over GLM-4.5 in areas corresponding to agent efficiency, reasoning, and coding benchmarks. Whereas it’s accessible as open weights for self-hosting, working it at full capability might be resource-intensive. In consequence, many builders want a light-weight subscription choice that allows them to entry the mannequin with out requiring heavy {hardware}.
Introducing the GLM Coding Plan: an inexpensive and easy manner to make use of GLM-4.6 inside your present workflow for roughly $3 monthly. This plan integrates seamlessly with fashionable developer instruments, permitting you to attach it to your editor or command-line interface with minimal setup.
On this tutorial, you’ll discover ways to hyperlink the GLM Coding Plan to OpenCode and use a single immediate to create a fundamental payment-platform web site, enabling you to judge GLM-4.6’s efficiency in an actual growth state of affairs.
# Understanding The GLM Coding Plan
The GLM Coding Plan is Z.AI’s subscription-based service that integrates AI-powered coding utilizing the GLM-4.6 mannequin into fashionable developer instruments, beginning at simply $3 monthly.
It really works seamlessly in environments like Claude Code, Cline, and OpenCode, permitting you to take care of your present workflow whereas upgrading the underlying mannequin.
As an alternative of charging per token, this month-to-month subscription affords an entry-level Lite plan that gives roughly 120 prompts inside a 5-hour cycle in Claude Code, making it a cheap alternative for frequent coding periods.
In sensible phrases, for simply $3 monthly, you’ll be able to entry GLM’s coding capabilities throughout supported instruments like Claude Code, with plans for ongoing enlargement to further integrations. This fashion, you gained’t should handle usage-based charges.
Picture from GLM Coding Plan
# Setting Up OpenCode With The GLM Coding Plan
We can be utilizing the GLM Coding Plan with OpenCode. OpenCode is just like the Claude Code ecosystem and, in some circumstances, could provide higher integration choices than Claude Code, permitting you to simply incorporate any mannequin from open-source or Claude’s proprietary sources.
1. Please set up OpenCode utilizing npm. Be sure you have Node.js put in. Run the next command in your terminal:
npm set up -g opencode-ai
If you’re utilizing Linux, you’ll be able to set every thing up by typing the next command within the terminal:
curl -fsSL https://opencode.ai/set up | bash
If you’re on Home windows, you need to use the built-in command to put in OpenCode:
2. Go to the GLM Coding Plan web site and enroll. Choose the GLM Coding Lite subscription. You have to to supply bank card data, and $3 can be charged to your account.
3. Entry your dashboard and click on on the “API Keys” choice. Generate your API key and duplicate it.
4. Within the terminal, kind the command:
Choose the Z.AI Coding Plan, and paste the API key that you simply simply copied.
5. Begin OpenCode by typing opencode within the terminal. Use the /mannequin command to enter the mannequin choice menu and select the “GLM-4.6” mannequin offered by the Z.AI Coding Plan.
You’re all arrange. It’s that simple.
# Creating The Gen Pay Web site Utilizing GLM-4.6 Coding Plan
We’ll now code our approach to creating a web site for “Gen Pay,” a contemporary, mobile-first cost resolution designed for Gen Z. Constructed with cutting-edge net applied sciences, our objective is to ship an attractive, responsive, and accessible consumer expertise.
We’ll launch OpenCode and kind the immediate to create the complete web site.
Immediate:
Construct an interactive, mobile-first web site for a Gen Z cost resolution (Gen Pay) utilizing a contemporary net stack. Observe all adjustments with clear, atomic Git commits. Make the expertise extremely partaking and responsive.
After a couple of minutes, the plan was generated, and we have been instructed to exit plan mode and change to construct mode. You are able to do this by urgent the Tab key in your keyboard. After that, merely kind proceed, and it’ll begin creating the folder construction, information, and necessary metadata, all whereas monitoring adjustments with Git.
It took about 5 minutes to complete creating the web site. Subsequent, we requested it to put in all dependencies and run the web site regionally.
Notice: On Home windows, some customers expertise points scrolling by means of the generated historical past. To keep away from this, change your terminal to the open-source terminal alacritty/alacritty.
The web site seems to be polished; we discovered no seen errors on the primary evaluation. It consists of choices, animations, vibrant colours, and all the mandatory data for the cost platform.
The web site incorporates all of the required functionalities, and every thing works easily. You solely must make some minor changes, corresponding to including hyperlinks to social media accounts and the YouTube hyperlink for the demo video.
It even features a kind that enables customers to create an account. I’m impressed; it’s on par with Claude Sonnet 4.
The perfect half is that it tracked all of the adjustments, and you’ll publish the venture on GitHub: kingabzpro/Gen-Pay: cost resolution designed for Gen Z
# Conclusion
The GLM-4.6 Coding Plan is a wonderful choice when you’re searching for most coding functionality at a minimal price. Plans begin at simply $3 monthly and are appropriate with fashionable instruments corresponding to Claude Code, Kilo Code, and OpenCode. This plan affords roughly 3 times the utilization of typical alternate options (Claude Code), offering round 120 prompts per 5-hour cycle on the Lite tier.
The mix of a low worth, greater request quota, and broad integration makes it simple to include into your present workflow with out dropping performance.
I’ve been utilizing it with Cursor, Kilo Code, Droid, and OpenCode. Most significantly, I solely paid $3 for the complete month, and I didn’t even attain the restrict. In comparison with the Cursor and Cline plans, I consider that is the best choice accessible.
Abid Ali Awan (@1abidaliawan) is an authorized information scientist skilled who loves constructing machine studying fashions. At the moment, he’s specializing in content material creation and writing technical blogs on machine studying and information science applied sciences. Abid holds a Grasp’s diploma in know-how administration and a bachelor’s diploma in telecommunication engineering. His imaginative and prescient is to construct an AI product utilizing a graph neural community for college students battling psychological sickness.
